Borate-free blown-in insulation

GREENFLOC – Borate-free blown-in insulation for professional tradespeople

Lambda 037 from 28 kg/m³
Borate-free, environmental and economical cellulose insulation
One insulating material for any insulation thickness
joint-free and cavity-filling
No waste

GREENFLOC F
the all-round intelligent insulation solution

GREENFLOC F is a cellulose blown-in insulation obtained from sorted newspapers. The product‘s high quality is confirmed by a European approval and a natureplus certificate.

GREENFLOC processors appreciate the fast, easy processing of our high-quality insulating material due to its very good flow properties. A standard blowing machine transfers the cellulose insulation under pressure into the structural components to be insulated where it is injected in accordance with the processing guidelines.

The result is insulation that significantly reduces the energy costs for heating in winter and air conditioning in summer.

Your GREENFLOC consultant
near you

Get in touch with us!

Tested quality – easy processing with great impact

Only high-quality raw materials are used in the production of GREENFLOC F cellulose insulation. To ensure the highest quality, every step must be monitored – from arrival of the raw materials to delivery of the finished product. Internal and external quality monitoring guarantees that the cellulose insulation complies with the highest European quality requirements.

Product benefits

Borate-free, environmental and economical cellulose insulation
Superior lambda values
One insulating material for any insulation thickness
Easy processing with standard blowing machines

No waste
No weak spots in the insulation layer as joint-free and cavity-filling
Can be used even for high delivery heads
High-quality UV-resistant product packaging

GREENFLOC F
for insulating walls, roofs, ceilings

GREENFLOC F – for insulating walls, roofs and ceilings is transferred into the structural components under pressure using blowing machines and injected in accordance with the processing guidelines. Cracks, voids and corners are reliably filled by the blow-in insulation. The result: a continuous insulation layer capable of capillary diffusion, without waste, which guarantees a comfortable indoor climate in every season.

Product benefits

Fast, easy processing
Tested settling safety
Very good insulation values
natureplus-certified insulating material

Application:

Bulk density:

from 40 kg/m³

Thermal conductivity:

037-038

Approval:

ETA-21-0163

GREENFLOC F
for insulating the top floor ceiling

GREENFLOC F is the fast, cost-effective solution for insulating the top floor ceiling. If the attic is used for storage, GREENFLOC F is injected into the floor/ceiling structure to fill the space. If the attic is not in use, GREENFLOC F is blown onto the top floor ceiling. In this case, it is advisable to install a walkway, for example, which allows access to the roof hatch.

Product benefits

Fast, easy processing
Low material consumption
Very good insulation values
natureplus-certified insulating material

Application:

Bulk density:

from 28 kg/m³

Thermal conductivity:

037

Approval:

ETA-21-0163

Area of use:

GREENFLOC F can be used for applications where the non-load-bearing insulating materials are injected into vertical or horizontal cavities to fill the space or are blown as loose fill onto horizontal, curved or slightly inclined (≤10°) surfaces.

Area of application - wall

Blown-in insulation for exterior wall cavities in timber frame construction
Blown-in insulation for partition wall cavities in timber frame construction
Density range: 48 – 60 kg/m³

Area of application - roof

Blown-in insulation for sloping, non-ventilated cavities under the roof seal (full rafter insulation)
Blown-in insulation for flat roofs with top covering and non-ventilated cavity under the roof seal
Density range: 48 – 60 kg/m³

Area of application - ceiling/floor

Blown on insulation, not suitable for walking on, for ceilings/floors under undeveloped attics (insulation between or above the supporting structure)
Blown-in insulation between the supporting timbers of floor structures as cavity insulation or soundproofing
Density range: 28 – 47 kg/m³

Compression table

Component	Open blowing	Ceiling ≤10°	Roof 10-45°	Roof ≥ 45°	Wall ¹⁾
Insulation thickness	kg/m³	kg/m³	kg/m³	kg/m³	kg/m³
≤ 12 cm	28	40	43	43	46
≤ 18 cm	28	43	43	45	48
≤ 24 cm	28	45	45	47	50
≤ 30 cm	30	45	47	49	52
≤ 36 cm	35	47	49	51	54
≤ 42 cm	39	48	51	53	56
≤ 48 cm	42	48	53	55	58

Safety margins for dry injection and open blowing are already taken into account in the values shown above. We check the densities up to an insulation thickness of 48 cm.